What You Should Know About Industrial Surge Protectors

Posted by

Before you buy an industrial surge protector, you should know a little about their use and purpose. These devices are commonly known as SPDs, or Surge Protection Devices. They are designed to protect electrical equipment from overvoltage. There are two types of SPDs: type two and type three. Type two is installed on the load side of the primary service equipment, while type three is installed downstream, after the main system breaker. The types two and three differ in their use and function.

Industrial surge protection devices are typically wired in either parallel or in-line connection. The former routes the current from the load directly to the surge protective device, while the latter places an extra length of line between the surge protection and the wire. The latter is a good choice for applications where power is necessary to monitor the safety of employees or the environment. The latter is a better choice if you use a mobile or telecommunications device where the risk of damaging other equipment is a concern.

In addition to joule ratings, you can also look for surge protection by determining the equipment’s value and type. While the joule rating of the industrial surge protector is crucial, it is also important to remember that the amount of protection provided by the product is dependent on the type of equipment and region of the country where the location is located. For example, a UL 1449 audio video surge protector may have a joule rating of 5100 kA, while a UL 96A lightning protection system may only require a protector with a higher joule rating. Get in touch with ZeroDT to get industrial surge protection.

The benefits of industrial surge protection products are many. These devices protect sensitive electronic equipment from dangerous surges and voltage spikes caused by lightning, utility load changes, or internal load switching. They also have built-in alarm pins to alert you to any potential surge problems. They are also easy to install, which makes them a convenient choice for industrial environments. These products can be used for both internal and external mounting. The advantages of these devices far outweigh their disadvantages.

These surge protectors help protect electrical equipment from overvoltage by breaking the dangerous interference energy into safe levels. When a certain voltage threshold is reached, a surge protector will trigger and divert the current to earth. There are two types of surge protectors, the first of which is a transient surge protector. The latter aims to limit the voltage delivered to an electric device. It does this by incorporating various elements into its design. Among these are spark gaps, discharge tubes, and zener-type semiconductors.

Another type of surge that threatens industrial equipment is lightning. Lightning can damage equipment by coupling onto power lines. Lightning usually strikes a building, moving down the structure, and then coupling onto parallel lines. This is where industrial surge protection is very important. Lightning can also cause damage to critical equipment, so it’s important to protect them. Having a surge protector on the power line near the equipment is critical. So what are the benefits of industrial surge protection?

DITEK, the quality standard for commercial surge protection, announces the D200M and D300M families of Industrial Surge Protectors. These units protect AC power systems in demanding environments by offering high surge current ratings and proactive operational management. They come in five different voltage configurations and 10 protection modes. These surge protectors are also listed in the MasterSpec Construction Specifications, a product of the American Institute of Architects.

DITEK D50 Industrial Surge Protector is a high-performance, industrial surge protection device designed for demanding environments. The D50 Series incorporates individually fused components to ensure maximum protection and performance. D50-120/2401 protects 120/240VAC split phase panels. This device also has a built-in LED indicator to monitor power levels. The D50 Series is an excellent option if you have an electrical panel rated at less than 200A.

In terms of size, larger panels require a higher-kA device rating. It is common misconception to believe that a 200 kA device is sufficient for most applications. Instead, you should opt for a higher-kA device with a surge current rating of at least 400 kA. There are a number of factors that you should consider before buying an industrial surge protector. A good SPD will protect your equipment against large transients as well as internal transients.